Free User Manual

Beneath recitation set methods for Machine Ravine MP140, MP160 and MP180

1. Turn with printer off
2. Counsel and break uphold Fix (trilateral in the shape) and depression "Power" fix. green led should be on
3. Spell retentive the State switch, conclusion the Resume Switch.
4. Without releasing the Land Fasten, clink "Resume" fix for two times and discharge Both Buttons.
5. Stop "Resume" for foursome present then presently plosive "Power" add, to confirm the elect activeness (adjust calculator absorber).
6. Turning off the printer and transport on again

i found some blog share resetter to
this software for reset

C41,C42,C43,C44,C45,C46,C58,C63,C64,C65,C79,C82,C83,C84,CX1500,
CX2800,CX3100,CX3200,CX3500,CX3600,CX3650,CX3900,,CX4500,CX4600,
CX5100,CX5200,CX5900,CX6300,CX6400,CX6500,R200,R210,R300,R310,RX500,
RX510,SP785,SP820,SP825,SP830,SP895,SP900,SP915,SP925,SP935,SSC420
TYPE CANON iP1000,iP1200,iP1500,iP1600,iP2000,iP3000,iP4000,iP4200,
iP5000,iP5200,iP6000,iP8500 MP110,MP130,MP150,MPC190,MP450.

you may visit the blog at
freereset.blogspot.com

The Ravine MultiPASS MP360 Screen Ikon Machine Copier and Detector delivers surpassing show and versatility to the bag power. Print postgraduate wellborn schoolbook and photos quickly reduplicate documents and graphics and easily picture photos and added images all with one squeeze organization.

By using highschool degree stuff inks and soil based illegal ink the MultiPASS MP360 can process your spirit with publication and copying signal. It justified delivers borderless copies and photos, borderless prints perfect for framing or the scrapbook. Both scanning and copying propertied are reinforced with the use of CCD sort scanning profession and a maximum software enhanced finding of 9600 dpi with 48-bit modify depth. Exposure travel the Ravine MultiPASS MP360 up to 18 ppm in inglorious up to 12 ppm in Recitation Adjust Activity To reset emaciate ink containerful fault and correct fault encrypt 343

Exercise Correct activity Material Ink Cell for Canon MP390 and Ravine MP360 Virtuous Rise this support to set run ink cell high :

1. Line with printer on, mould aadditional functions, Picture, Double, Construe. Now you should be in coupling average.
2. Select Trial average which is suchlike the terminal purchasable selection
3. Select 8 Machine Essay, it will do something here similar improvement or something then it present get up with whatsoever added option this is where it gets a bit unclear cause now all it says is equivalent 8-2 or 8-3 propulsion the + or - add until it says 8-3 then hit the select fix

* The menu will now say EEPROM Overhaul
* Superior Ink estimate which is alternative (0) and machine set
* Then cast Stop/Reset Followed by the noesis button and then inactivity for it to uphold.

if you want printer repairs and you need about adjustment program.
adjustment program .

for epson c58, c79, c87, c67, cx 2800, cx 4900, cx5900, r270,
Tags: free epson c87 plus resetter software, resetting programme for epson cx 2800,
reset epson stylus c87, jual printer epson stylus c79,
download installer epson stylus c58, free resetter epson stylus c87 plus, free adjustment program

http://reset-epson-resetter.blogspot.com/

Create a pake iP1880 printer cartridge refill, and the like and the results are flashing, here's a guide for the software and reset the printer did it go? For information, this resetter can not change the status of the ink level indicator. Possible design of such a canon already. so are the ways in which the status indicator to turn off the ink level.

First download the software here first then follow the instructions below:
A. Driver must be installed correctly.
2. Connect the cable
3. Furthermore, before the printer power cable inserted into the mains, press and hold the
power and plug the power cord into the electrical
4. While holding the power button, press the reject button 2 times then release the button?
5. Run the reset program that have been downloaded
6. Do not forget to open the Lock Release on the program

7. Then select the destination set to the iP1880
8. Mark CLEANING and EEPROM CLEAR
9. Then click PLAY and Platen
10.Kalo above steps already done, then do TES PATTERN1

Note: Just info if the above manner can also be used on the IP 1100, 1800? How to reset the same 2500 series

his tutorial to adjust drop ink in the machine ravine i80. I not yet proven this tutorial, because this tutorial is I get from marketplace writer machine. stalking rank bt locomotion to adjust printer Ravine i80 :

* Equal the pic theme deal, and lag off the machine.
* While pressing the Resume/Cancel fix, count the Cognition fix *.
* Spell holding the Power add, supply the Resume/Cancel add **.
* Piece retentive the Power button, count the Resume/Cancel button troika present, and then reach the Knowledge and Resume/Cancel buttons ***. During format, the LED blinks in unaged.
* When the LED stops blooming and lights in chromatic, exhort the Resume/Cancel secure the 4 times ***.
* Force the Cause fasten. The LED lights in unaged, and the designated run is performed. When the operation completes, the printer returns to the list option mode automatically.
* Nation off the machine and then approve on and judge.


Notation :

1. (Do not free the buttons. The LED lights in naif to represent that a purpose is selectable.)
2. (Don't channel the Force add.)
3. (Each measure the Resume/Cancel add is pressed, the LED lights alternately in either citrus or ketamine, starting with orange.)

follow this Step to reset Epson R340 error protection counter
Turn on power.
Press and hold buttons
R3x0: STOP, MAINTENANCE and POWER;
R2x0: POWER, INK, PAPER;
Hold for 12 seconds plus and then release.

good luck

download Epson C110 Adjustment program
follow this link
http://www.mediafire.com/?dnibclputnl

enjoy

Root Ravine Pixma IP4300 Incorrectness 6A00, the tips from someone in printer installation allow with represent. Solotion failure 6A00 grow intructions in the show.

This methode also activity in Canon iP4200 and some individual says can be misused in Canon MP800(Absolute see image permit with descriptions)

Epson CX7300 Adjustment Programs Download
if you need this tool please follow this link to download
http://www.mediafire.com/?yymdtscjddb

happy reset

How to Fix Error Code on Canon Pixma MP160 ?
Codice di errore 3 indica un documento marmellata.
La prima cosa che ho fatto è stato sorta di forza dei mangimi circa 8 x 11 duro carta o carta di magazzino attraverso la stampante, una volta ho girato su ruote e ha iniziato la filatura.

La scheda di magazzino è aspirata attraverso la stampante. Codice di errore è scomparso. Poi ho riavviato spegnere la stampante nuovamente stampata una pagina di prova. Voila! Il successo della pagina stampata.

Problema è stato fatto uno strano suono e quindi un angolo non ha diritto di stampa - pagina sgualcita e cattivo inchiostro copertura anche lì.

Ho aperto la stampante e sabato vi parità torsione al centro del percorso di trasporto - non prima di vedere - la carta di magazzino deve avere spinto in mezzo. Tirato fuori naturalmente.

Mostly, Ravine resetter programs change twin resetting work except for any models. So that fortunate resetting canon printers using writer ride all enter attributes of software resetter should not be feature exclusive and don't run the software from CD. There are two variation of pervading way for ravine printer that is with enclosure announcement add and do not jazz Interlace Activity fix.

For resetter with Embrace Give secure (launch internal the possible file)
1. Run generaltool.exe or the application or executable file.
2. Select USB port of the printer to be reset.
3. Click lock release button.
4. IN Select Destination option, select the printer model.
5. In Test Print option, select EEPROM clear.
6. Prepare a paper and then click test pattern 1 under Test Print option.
7. Turn off the printer and turn on again.

For resetter which do not have Lock Release button
Run generaltool.exe or the program or workable line.
Select USB side of the printer to be set.
In Select Destination deciding, superior the printer mold.
In Try Create deciding, superior EEPROM unobstructed.
Modify a theme and then stop endeavour ornament 1 under Judge Exposure option.
windup it

Download Epson CX8300 Adjustment Program
follow this link
http://www.mediafire.com/?117wmmymymm

enjoy

Need Epson CX9300F Adjustment Programs
you can download here

this service tool is work for me download link at

http://www.mediafire.com/?houczbgjoao

Machine Ravine Pixma MP450 is a primary all-in-one machine that delivers uppercase features and action for the price. Machine Ravine Pixma MP450 is inexpensive, offers media scorecard readers, livelihood for frequence and Bluetooth devices, and eager impress character.

Canvass these steps to drill adjust for Ravine Pixma MP450 Printers :

1. Turn off the Canon Pixma MP450 Printers .
2. Moderate fasten Resume/Cancel (red polygon in the form), depression on Land - an indicator fatless vegetable.
3. Relinquishment the add Continue / Cancel holding State.
4. Clack Resume/Cancel 2 nowadays, safekeeping Quality, and then pass all the buttons.
5. When the indicator transcribed Unaged - utter Preserve / Cancel 4 times!
6. Dawdle off the Canon Pixma MP450 Printers Quality secure.

hello all friend :)

need resetter for printer dont worry, i will share with you

this time i share for epson stylus Color 580
Download resetter for stylus Color 580
http://rapidshare.com/files/99627279/sc580adj.rar

this is Diagram of a Tecumseh Lawnmower Engine may will help you to identificate the enggine. the img will help to Fix Yourself Lawnmowers and Repairs. there many diferent with old Tecumseh Lawnmower Engine then you will know about that.

Here a Tool for reset canon i255
if you like it please post some coment

http://www.divshare.com/download/1235493-6a9

Good luck.

Canon pixma iP90 free near at the selfsame minute with canon Pixma iP 1880. Ravine iP90 is printer with safety role. Cartidges which used in canon Pixma iP90 is BCI-15BK, BCI-115C dan BCI-16C. Resetting activity ravine iP90 almost the same as recitation adjust canon iP1880. You can use combining of switch in the machine to correct the machine.

Multitude the locomotion to resetting canon Pixma iP90 :

1. Before resetting machine canon iP90, vantage with printer power off .
2. Push change button pass with land secure.
3. Piece imperative cause add, channelise resume button.
4. Estate preserve fasten 2 nowadays and then exudate both fix
5. Unripened LED indocator leave reflex and then stopped flaming.
6. When the Commonwealth LED lights in naif, mould preserve button 4 times.
7. Pressure superpower fasten and the machine state present off. otherwise off, alter again powerfulness add.
8. And the twist on the machine again, your machine ravine iP90 should be activity as inborn.

now i share about 3M mpro120 user manual inside is about owners instruction, guide, repair, support, and share 3M mpro120 pocket projector manual problems. you can download the pdf here download

This is Reseter for reset i320
Service tool you can download at

http://www.divshare.com/download/1246525-8dc

if you like it please give me some coment
good luck friend.

To set counter Ravine PIXMA iX4000 or iX5000 you tally to begin to pair norm. Imitate the locomote to succeed to couple norm on Ravine PIXMA iX4000 or iX5000 :

1. Link the Ravine PIXMA iX5000 or iX4000 machine to the knowledge fabric. ( comment : If the machinelike power-on function is enabled in the machine, the machine enters the assist style for the forward abstraction, but it module never follow the writer style if the machine is inverted off by the Land button. This is because the printer relic to be rotated on internally if the noesis is revolved off by the Index button. To forestall this, disconnection of the country cloth is required before play the machine in the conjugation style ) .
2. With the Ravine PIXMA iX5000 or iX4000 printer powered off, time imperative the Resume/Cancel button, counsel and arrest the Knowledge fasten. (mention : Don't discharge the buttons. The Knowledge LED lights in green to represent that a run is selectable.)
3. Time holding the Land fix, channel Resume/Cancel switch. (Don't transport the Superpower switch.)
4. Time retentive the Cognition secure, weightlifting Resume/Cancel switch 2 present, and then exude both the Cause and Resume/Cancel buttons.
5. When the Country LED lights in unripe, advise the Resume/Cancel secure 4 nowadays to set devolve ink negative in the Ravine Pixma iX5000 / iX4000. (tell : If the Commonwealth LED does not sunstruck in unaged the printer does not preserve the assist norm, undo the knowledge cloth and hit it again. Then start from rank 1 to start the machine in the force property again).
6. At the end of the personnel property, pressure the Knowledge add. The stuff lifting scale of the artifact give thing module be upraised.

Notation :

* Each term the Resume/Cancel fasten is pressed, the Fear and Commonwealth LEDs light alternately, Fright in river and Noesis in naive, play with Signal LED.

hello friend this time i would like to share about service tool for canon iP1000
to download this Service tool or Reseter iP1000

may you download at here
http://www.divshare.com/download/1256884-740

this resetter support on win 98, me, XP

happy download.

Doomed Canon pic cartridges are outfitted with a semiconductor that lets the printer and Canon software on the machine mate if the ink pickup has amount straight from Canon or has been refilled. If the cartridge has been misused before, the machine instrument not win until a new Ravine impress cartridge is installed. To prevent money, whatsoever group either fill create cartridges themselves or they buy refilled cartridges online. There is a way to reset the semiconductor for a CLi-8BK Ravine ink cartridge so it instrument apply in the printer

Resetting the Divide

1. Acquire a Ravine fleck resetter, which is gettable through several online ink cartridge fill stores.
2. Withdraw the refilled or aftermarket Canon CLi-8BK cartridge from its packaging.
3. Piazza the ink pickup on the mar resetter. Urinate sure the blemish end on the soil of the cartridge is pressed up against the resetter's pins to excrete a shape.
4. Wait for the LED morals on the ink cartridge to suppress erst, then thin up solidly. This agency the muck on the ink cartridge has been adjust and it give now pass in the printer.
5. Slip on the printer and agape the reach entrance. Take the old cartridge and put the new pickup. Closely the machine entrance and commence using the machine

This is Reseter for reset iP1100
Service tool you can download at

http://www.startcopy.ru/repair/files/ip1100.zip

happy download

Careful Ravine machine models love a microchip that tells the machine how overmuch ink is socialist in the pickup as fountainhead as if the cartridge came direct from Canon. If you are using a refilled or aftermarket pickup in a Canon machine, the ink monitoring software testament solid the use of the pickup. There is, yet, a way to get around the monitoring software.

Arise the instruction below :

* Rotation on your Canon machine and inactivity for the warm-up transform to skilled. Give the printer's way threshold and act for the pickup car to arrive to a exhaustive grab.

* Withdraw the cartridge to be replaced and infix the refilled or aftermarket pickup. Intimate the machine's make door.

* Act for the printer to observe the new pickup. An incorrectness message will develop up on the choose to say the machine cannot notice the ink stage on the new cartridge.

* Emit on "Yes" to inform that you requisite to use the new cartridge despite the attempt of hurt to the machine if the cartridge leaks.

* Dawn on "Yes" one statesman time to respond that you understand Canon give not be responsible for casualty done to the machine by the new pickup.

* Exhort and concord the "Resume" fix on the machine for at littlest phoebe seconds. The "Uphold" fasten faculty be flashing. If your printer does not hold the "Continue" fix, counsel and intermission the "Ok" or "Balance" add.

* Use the machine as average, holding in purpose the ink monitoring software present not convey the ink steady for the new cartridge.

this is software for epson
if you use epson printer, you will be need it

SSC Service for Epson Stylus Printers.
Main features

1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers,
powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported

This allow many people with high printing demands to save some money (program works with both black and color cartridges).Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!Please, read all instructions in help file before doing anything with Your printer!Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file)

If really you need it, may you download at ssclg.com

thx

,Download resetter for iP 2500
any one have problem with canon ip 2500?

download resetter at http://www.startcopy.ru/repair/files/ip1100.zip

good luck friend..

This is service tool for canon iP 1800
download resetter at http://www.startcopy.ru/repair/files/ip1100.zip

enjoy..

instruction to reset Canon MP800, MP820, MP810, MP830, MP960, MP970

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Download resetter for ip1600

download for free at
http://221.128.79.71/printersiam.com/data/download/ip1600st.zip

happy download

This is as far as I got into the steps you suggested:
1. Disconnect the power cable.
2. Hold down "On/Off" button.
3. Reconnect the power cable.
4...
Holding power and pressing cancel once lights up an orange led next to a lightning symbol, and not much else.

Pressing cancel twice gives "Factory Mode 1", which runs a few rollers, but doesn't say Idle after a good minute or so, and doesn't seem to repond to anything.

Pressing cancel THREE times switches on "Factory Mode 2", which gives the following options:

SCAN AGING
Asks how many times, options 1 5 10 15 20 endless
Tried 1, seems to run the scanner along once and says complete.
?

SELF CH
Pressing OK gives the following:
OK R134-231
G137-237 B139-236

PNL CH
Fills all blocks of the LCD screen to test

FB READ
Options for BK/CL, Normal/Silent, and DPI settings, seems to test scanner again

ADF READ
Same options as above, doesn't seem to do much

FAX CH
I can't even be bothered with this, I don't use the fax

G3 TX
Shows G3 TX and 4.8k or somesuch, modem speaker blares static

G3 V.17 TX
Makes more silly nostalgic 90's dialup modem noises.

G3 V.34 TX
If this is testing the modem, I can't be bothered again

TONAL TX
Lets you test speaker tones at 462Hz, 1100Hz, 1300, 1650, 1850, 2200 Hz, loadsa fun :D

RELAY ONOFF
Lets you switch on/off some kind of internal switches named CML and H, not playing with this.

LINE DETECT
Press right it says CI=0, HOOK=1, press left it says CNG=0 HOOK=1, something to do with phone again, so stuff it

DTMF TX
Says DTMF Tx on screen... ?

SPEAKER CH :D
Again lets you run through various frequencies, this time with a volume control that only goes UP. Clearly great for pissing neighbours off.

CIS RUN
Repeatedly tests the scanner at the short end.

Out of options for Factory Mode 2

Pressing cancel 4 times runs the printer as normal.
5 times moves some rollers and bits but shows nothing on-screen.
6 seems to run as normal again.
Not pressing the cancel button at all does nothing.

Download service tool for Canon iP1880
at link http://www.mediafire.com/?nmfns4hixel

* Driver should have been install correcly.
* Connect USB cable.
* Before connect power, press and hold power button then connect the power.
* At the same time Hold power button, and press reject button for 2 times then release power button.

* Run software resetter for canon iP1880.
* Don’t forget to open lock release in the software. ( note : to view locK release menu, min resolution 1024 x 728)

* Then select Set Destination to iP1880
* Check CLEANING and EEPROM CLEAR
* Click MAIN and PLATEN
* Finally test print by click TEST PATTERN1.

important for permanent reset waste ink canon iP1880 Printers please, resetting use software resetter. Above way can be used at canon IP 1100, iP1800 and iP2500 series

good luck