Wednesday, January 19, 2011
Browse »
Home »
Canon
»
CanonBJC-5000 reset
CanonBJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four (4) times.The indicator should be GREEN.
6: Press Power to set data Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two (2) times.The indicator should be GREEN.
6: Press Power to Print Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
CanonBJC-5000 reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four (4) times.The indicator should be GREEN.
6: Press Power to set data Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two (2) times.The indicator should be GREEN.
6: Press Power to Print Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.