Free User Manual

The D-Link AirPlus Xtreme G VDI-624 High-Speed Wireless Router is an 802.11g high- performance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the VDI-624 provides data transfers at up to 108 Mbps (compared to the standard 54 Mbps) when used with other D-Link AirPlus Xtreme G products. The 802.11g standard is backwards compatible with 802.11b products. This means that you do not need to change your entire network to maintain connectivity. You may sacrifice some of 802.11g’s speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate when you incorporate the 802.11g standard into your 802.11b network. 
You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11g devices . In addition to offering faster data transfer speeds when used with other 802.11g products, the VDI-624 has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) and 802.1x compatible products in a network with a RADIUS server, the security features include: Wi-Fi Protected Access authorizes and identifies users based on a secret key that changes automatically at a regular interval.

WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the older WEP encryption required the keys to be changed manually.)

download D-Link AirPlus Xtreme G VDI-624 High-Speed 2.4 GHz Wireless Router User Manual here

Your new cable modem provides high-speed access to the Internet by an active Internet Connection through your cable service provider. This user guide describes how to set up and use the cable modem. Before installing the cable modem, you should read this user guide to ensure proper cable modem operation. Your cable modem has the following features to help you access and use the Internet:

• Two-way design allows the cable modem to send and receive data over the cable television network. Cable bandwidth allows data rates of up to 38 megabits per second (Mbps)*, which is faster
• than analog modems, integrated services digital network (ISDN), or asymmetric digital subscriber line (ADSL).
• Using your cable line means that the cable modem is always on, always connected, and does not tie up your phone line.
 • Plug-and-play operation through universal serial bus (USB) ensures easy setup and installation.
• Data Over Cable Service Interface Specification (DOCSIS¥) compliance ensures interoperability with DOCSIS compliant cable operators.
• Windows Hardware Quality Labs (WHQL) certification ensures interoperability with Microsoft Operating Systems.

Using the USB port allows you to install the cable modem faster and easier than using the ethernet port, because you do not have to install and configure a network interface card (NIC). USB, however, only enables you to connect one computer to the cable modem. Using the ethernet port allows you connect multiple computers to a cable modem through the use of additional equipment that is not included. modem. If you use the default Windows-supplied software drivers, you will not be able to properly install the cable modem. You must verify that Ambit USB Cable Modem appears on the screen. If USB Composite Device appears, you must click Back twice and specify the correct location of the driver files.

download Ambit Cable Modem U10C018 User’s Guide here

This Document describes the AT command-based communication interface between TE and MS of Huawei UMTS Datacard/Modem. The interface can implement the functions such as voice call, SMS, telephone service, supplementary service, and network setting. This document describes the AT interface of Huawei UMTS Datacard/Modem. The description on the AT interface is only limited to the interface packet itself, the usage and use procedure of TE and MS, and does not cover the contents which are not directly related to the interface. HUAWEI UMTS Datacard/Modem is a wireless terminal of the PCMCIA or Express or USB interface. It is used together with PC to provide data service, voice and SMS functions. This document describes the AT interface.

Therewith no description or definition explain for the document interface, and no temporary support to all kinds of parameter values, so no suggestion of usage. For the extended interface, parameters can be added behind the AT command. If the interface fails to meet the new requirements as detected in the later stage of product development, new parameters can be added on the basis of the original interface. In addition, for all the currently available interfaces, if the command received by MS is not identifiable, the “result code” of COMMAND NOT SUPPORT will be reported; if there is one surplus command parameter, the MS will report the “result code” of the corresponding TOO MANY PARAMETERS. No equal mark itself is deemed a surplus command parameter. All newly added AT command interfaces of the E630 project team begin with “^”. This project team specifies that: In the AT command name such as “AT^XXX”, the number of X cannot be more than 9 currently. All interfaces herein refer to the interfaces between TE and MS, and are used for guiding the implementation of the function requirements

download HUAWEI UMTS Datacard/Modem AT Command Interface Specification here

This document describes how to finish VPN configuration on three hardware VPN models of D-Link—DI-804HV, DI-808HV, and DI-824VUP+. The VPN options of these three models are all the same. You can configure DI-804HV, DI-808HV, and DI-824VUP+ by web management interface. Type 192.168.0.1 (The LAN IP is 192.168.0.1 by default) in the browser, and then input user name: admin (there is no password by default) to pass authentication of web management interface.

Then finish the configurations as showed below on Gateway A and Gateway B. Verify the VPN connection Before you start to establish VPN connection between Gateway A and Gateway B, please make sure the Internet connection between Gateway A and Gateway B is workable. You can use “Ping Test” tool on Gateway A (or Gateway B), and input the IP address of Gateway B (or Gateway A) to see if there is any response from its peer device. Connect a PC (called PC_A) to the LAN port of Gateway A, and connect another PC (called PC_B) to the LAN port of Gateway B. Start to “Ping” PC_B on PC_A, then Gateway A will start to establish IPSec connection with Gateway B. If you can get “Ping” responses from PC_B on PC_A, then it means the tunnel has been established successfully.

You can also check the “VPN Status” page with web management interface to verify the status of VPN connections.

download Profile for IPSec Interoperability of D-Link DI-804HV, DI-808HV, or DI-824VUP+ here

A command line is a string of characters sent from a DTE to the modem (DCE) while the modem is in a command state. A command line has a prefix, a body, and a terminator. Each command line (with the exception of the A/ command) must begin with the character sequence AT and must be terminated by a carriage return. Commands entered in upper case or lower case are accepted, but both the A and T must be of the same case, i.e., “AT or “at. The default terminator is the ENTER key character. Characters that precede the AT prefix are ignored.

The command line interpretation begins upon receipt of the ENTER key character. Characters within the command line are parsed as commands with associated parameter values. The basic commands consist of single ASCII characters, or single characters proceeded by a prefix character (e.g., “&” or “+”), followed by a decimal parameter. Missing decimal parameters are evaluated as 0. When the modem has established a connection and has entered on-line data mode, it is possible to break into the data transmission in order to issue further commands to the modem in an on-line command mode.

download PCTEL V.90/K56Flex Series AT Command Guide here

This manual introduces the AT commands supported by HUAWEI CDMA DATA CARD, including the commands based on standard and extended AT commands developed by Huawei. This manual does not include commands that are implemented by Qualcomm while not required by the CDMA DATA CARD. The AT interface description only covers packets as well as the usage and process for TE and MS. DIAG interfaces are not introduced in this manual. It is recommended not to implement interfaces that are not referred in this manual or are not supported currently.

AT commands are packets transmitted through telecommunications ports. There is limitation on the size of packets. Except the two characters “AT”, an AT command can carry no more than 260 characters (including null characters). Both a response and an unsolicited result code (URC) can contain no more than 668 characters. Each command line contains only one AT command. An URC or a response reported by MS to TE can have only one AT command. Use a return character as the end of a command line. In principal, you are not allowed to use S3/S4 format to modify a command.

The principal applies to boards and personal computer (PC) programs. For AT commands need longer response time, a response can be reported in an asynchronous mode to ensure the normal running of other commands. If it takes longer for MS to respond to TE, the response may be disrupted by a URC. The interruption comprises of two situations. The first is that URC is reported after you execute an AT command and wait for the response. After the URC is reported, the AT commands are being processed and the response will be reported. The second situation is that during the execution of AT commands, an URC is reported. The URC and response may be reported together. In some circumstance, RING can e used as terminal characters. For example, during the response waiting procedure after a hang up command is executed, a RING is reported, and then the hang up command abends.

download HUAWEI CDMA Datacard Modem AT Command Interface Specification here

1 Overview of the Router. The TL-R402M Cable/DSL Router integrates a 4-port switch, firewall, and NAT-router. Its design is dedicated to Small Office/Home Office (SOHO) network solutions. The TL-R402M Cable/DSL Router will allow you to connect your network better than ever, sharing Internet Access, files and fun, easily and securely.

The TL-R402M Cable/DSL Router is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it quickly and share Internet access, files and fun comfortably.The TL-R402M Cable/DSL Router provides flexible access control so that parents or network administrators can establish restricted access policies for children or staff. It has built-in NAT and DHCP server supporting static IP address distributing. It supports Virtual Server and DMZ host for Port Triggering needs, and remote management and log so that network administrators can manage and monitor the network on real time. It also supports VPN pass-through for sensitive data secure transmission.

download TP-LINK TL-R402M Cable/DSL Router User Guide here

The TP-LINK TL-WN321G Wireless USB Adapter gives you the flexibility to install the PC or notebook PC in the most convenient location available, without the cost of running network cables. Its auto-sensing capability allows high packet transfer up to 54Mbps for maximum throughput, or dynamic range shifting to lower speeds due to distance or operating limitations in an environment with a lot of electromagnetic interference.

It can also interoperate with all the 11Mbps wireless (802.11b) products. Your wireless communications are protected by up to 128-bit encryption, so your data stays secure. Additionally, TL-WN321G supports soft AP Mode, and PSP connection

*, which brings you joyful Online-gaming experience. USB 2.0, portable and exible Supports Ad-Hoc/Infrastructure modes. Provides soft AP Mode, and PSP connection* Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps data transfer rates Supports 64/128/152 strength WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms. Supports Windows 2000, XP, Vista. supervisor program

download TP-LINK TL-WN321G 54M Wireless USB Adapter Datasheet here

1. Windows users: Insert the Motorola Netopia CD into your CDROM drive. The Installation Guide Wizard should start automatically and the Welcome screen should appear to step through your connection installation(s). The Motorola Netopia Installation Guide Wizard automates several tasks to get you up and running easily. Run the Wizard on every Windows-based PC that will connect to your network. Click the Next button. Follow the on-screen instructions to make all of your connections.
2. Locate the Modem near a power source, a DSL wall outlet, and in a location where air can circulate freely around it.
3. Connect the rounded end of the power supply to the power jack on the back panel of the Modem. Then, plug the power supply into an electrical outlet. The Power LED should light solid green. 4. Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the Modem. Connect the other end of the Phone cable to your DSL wall outlet.

download The Motorola Netopia 2210-02 ADSL2+ Gateway Single-Port Ethernet User Manual here

Your computer has an Ethernet card: Connect an Ethernet cord from the back of your computer to the Ethernet plug on the modem. Your computer does not have an Ethernet card: Connect a USB cord from the USB port on the modem to an available USB port on the front or back of your computer. Have the USB Driver disk/CD ready before continuing. You will be immediately asked to provide USB drivers when you connect the USB cord to the PC and modem.

Note: USB may not work with Windows 95 or 98. Your computer has neither Ethernet nor USB: You will need to buy and install an Ethernet card for your computer before continuing. Open Internet Explorer (or other browser) If service is ready and devices are connected properly, you should see a “Cable Modem Login” screen. Type your TCC Username (login) and Password. Your password is case-sensitive. If you do not have your password, contact our office and it can be picked up or sent to you. Initial connection requires a computer directly plugged into the modem via Ethernet or USB. Once a wired connection is established, you can log into the router administration console to configure Wireless Access and setup Security.

download Motorola SBG900 Setup Guide here

Combines award winning router features and Draft 802.11n wireless technology to provide the best wireless performance. ULTIMATE PERFORMANCE. The D-Link Xtreme N™ Router (DIR-655) is a draft 802.11n compliant device that delivers real world performance of up to 650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home.

Connect the Xtreme N™ Router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition, this Router includes a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience.
download D-Link DIR-655 – Hosted IP Phone here

Whether you’re checking out streaming media, downloading new software, checking your email, or talking with friends on the phone, the Touchstone TM502 Telephony Modem brings it all to you faster and more reliably. All while providing toll quality Voice over IP telephone ser- vice. Some models even provide a Lithium-Ion battery backup to provide continued telephone service during power outages.

The Touchstone Telephony Modem provides an Ethernet connection for use with ei- ther a single computer or home/office Local Area Network (LAN). Some Telephony Modems also provide a USB connection. You can connect two separate computers at the same time using both of these connections. In addition, the Touchstone Te- lephony Modem provides for up to two separate lines of telephone service. Splitter (optional): provides an extra cable connection by splitting a single may need a splitter if you have a TV already connected to the cable outlet that you want to use.

You can buy a splitter from any electronics retailer and most discount stores; you may also need a short piece of coax cable (with connectors); use it to connect the splitter to the cable outlet and then connect the Telephony Modem and TV to the splitter. The Touchstone Telephony Modem operates with most computers. The following describes requirements for each operating system; see the documentation for your system for details on enabling and configuring networking. To use the Telephony Modem, you need DOCSIS high-speed Internet service from your cable company.

download Touchstone TM502 Telephony Modem User’s Guide here

The D-Link DI-804V Broadband VPN Router enables your network to connect to the Internet via a secure, private connection using a Cable/DSL modem, such as the D-Link DCM-200 Cable Modem. The Virtual Private Network that is created on the Internet between your home and your office (with a VPN server) is secure from interference when you use the DI-804V. Connect the WAN port on the DI-804V to the Cable/DSL modem (e.g., the DCM-200) using an Ethernet cable. Your entire LAN can now access the Internet using just one Internet account. The DI-804V has 4 LAN ports.

That means that 4 computers can share the benefits of the DI-804V- equipped network. The DHCP-capable DI-804V will automatically provide unique IP Addresses for all the computers on the network. (DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning IP Addresses automatically. With a DHCP router like the DI-804V, there is no need to assign static IP Addresses, or purchase multiple addresses from the ISP – Internet Service Provider.)

downloadD-Link DI-804V Broadband VPN Router Manual here

Firmware Installation Guide: F1PI241EGau Time required: 10 minutes. The instructions below outline how to update the firmware on the Belkin 4-port wireless modem/router. By updating the firmware, you will be able to share your internet connection securely.

IMPORTANT: You must have downloaded the latest Belkin firmware from https://iinet.net.au/products/business/yourhotspot.html to your computer. Getting Started. Connect a Network/Ethernet cable from your computer to LAN 1 on your Wireless Modem. Open your browser and type http://10.1.1.1 into the address bar. Note: If you have changed the LAN address of your modem from its default value, you will need to put in the appropriate address here.

If you find the default doesn’t work but you don’t know what the right value is, check your network settings and try the IP address of your “default gateway”.
download Firmware Installation Guide: F1PI241EGau Belkin here

EVERYTHING YOU NEED FOR A HOME. Get everything from the D-Link DVA-N3260B Wireless 11n VoIP ADSL2+ Modem Router. This all encompassing device includes an integrated high-speed ADSL2/2+ modem, a VoIP phone connection, and two Ethernet ports. This router provides all the functions that your home needs to establish a fast, secure Internet connection and to make and receive Internet calls. WHAT THIS PRODUCT DOES.

This all-in-one DVA-N3260B router provides everything from a single box. Connect it to your phone line and establish a high-speed ADSL2+ line and make phone calls anywhere in the world using the Internet. This router lets you surf the web and make Internet phone calls at the same time. HIGH-SPEED WIRELESS CONNECTION. The DVA-N3260B has ready ADSL connection with up to 24Mbps downstream and 1Mbps upstream. It also features a built-in 802.11n wireless interface. Watch TV, listen to live music and broadcast on the Internet, play games and experience clear VoIP phone calls.
download D-Link Wireless 11N VoIP ADSL2+ Modem Router Product Specifications here

The Linksys SPA2102 adapter from Yak will include the following: the Linksys SPA2102 analogue telephone adapter (ATA), an Ethernet cable and a power adapter. You will need an analogue phone, a cable or DSL modem, high speed Internet service and an Ethernet cable that should currently connect your computer to your modem. In this configuration, if DSL is being used it is highly recommended to use the modem in bridge mode and use the ATA for PPPoE authentication. Configuration of the ATA in that way is described in section C.

1. Disconnect the power from your cable or DSL modem and computer.
2. Connect one end of an Ethernet cable into the INTERNET port on the phone adapter (ATA) and the other end into your Cable/DSL modem.
3. Connect another Ethernet cable from your computer or router WAN/INTERNET port to the ETHERNET port on the phone adapter (ATA). If you are using a home router then connect your PC(s) to the free router ports using separate Ethernet cables..
4. Connect your analogue telephone to the LINE 1 port of the ATA Phone Adapter.
5. Connect the power to the Cable/DSL modem and power it up.

download Installation Guide For The Linksys SPA2102 here

The MR814v2 router provides instrumentality for binary personalised computers (PCs) to the Internet finished an external band gain gimmick (specified as a wire modem or DSL modem) that is unremarkably knowing for use by a singular PC. The MR814v2 Cable/DSL Wireless Router with 4-port modify connects your local area scheme (LAN) to the Internet finished an external hit twist such as a video modem or DSL modem.
The MR814v2 router provides you with doubled Web content filtering options, nonnegative reading activeness news and instant alerts - both via e-mail. Parents and meshwork administrators can launch restricted gain policies supported on time-of-day, Website addresses and label keywords, and apportion high-speed cable/DSL Cyberspace access for up to 253 individualized computers. In element

download here

1 . Connect your Router’s ADSL cable to your phone jack or phone-jack adapter (microfilter) . If you are replacing an existing Router or gateway, this may require unplugging the existing gateway . note: If required by your Internet Service Provider (ISP), plug the included phone-jack adapter (microfilter) into your wall-mounted phone jack . Please check with your provider before connecting your Router if you are unsure whether or not you need to use the included phone-jack adapter .
2 . Plug the Router’s power supply into a wall outlet .
3 . Put the CD into your computer .
4.If the CD doesn’t open automatically, please browse to your CD drive and double-click on the Belkin Setup CD icon .
 5. After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router . Store the card under the base of your Router for future reference . download here Belkin Play Max Wireless Router With Built-in Modem User Manual

Share your broadband Internet connection. Connect your wired and wireless desktop computer and notebooks to your Belkin N Wireless Modem Router to share your broadband internet access. Now you can quickly exchange documents, share resources, and distribute large video and music files throughout your network at a link rate of up to 300Mbps.* Our advanced security protects both your wireless and wired computers from hackers and intruders.

You can add up to 16 computers to your wireless network with additional notebook and desktop adapters. For better wireless performance, use the Belkin N Wireless Modem Router with N Wireless Notebook and Desktop Cards connecting your client computers. Network Security. Enhanced Firewall Included. The Belkin N Wireless Modem Router provides state-of-the-art security. Wi-Fi Protected AccessTM (WPATM ) support provides enhanced encryption protecting your wireless network. Stateful Packet Inspection (SPI) and Network Address Translation (NAT) double your firewall and safeguard your network from Internet intruders. download manual here

The TP-LINK ADSL2+ Modem Router (TD-8810) is a 2-in-1 device that combines the functions of a DSL modem and 1-port 10/100Mbps Ethernet router. It supports the latest ADSL 2/2+ standards to provide higher performance (up to 24Mbps downstream and 3.5Mbps upstream) and longer reach from your Internet Service Provider’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM).

You can also create a wired network to share your high speed Internet connection, documents, photos, music, videos, and printers with the cooperation of switches. The TD-8810 includes a built-in QoS engine that helps prioritize Internet tra c to enable smooth Internet phone calls (VoIP) and lag-free online gaming. In addition, this device includes Dual Active Firewalls (SPI and NAT) to help protect your network from potential attacks from across the Internet.

download here