Thursday, July 5, 2012
Browse »
Home »
Modem
»
Motorola SBG900 Setup Guide
Your computer has an Ethernet card: Connect an Ethernet cord from the
back of your computer to the Ethernet plug on the modem. Your computer
does not have an Ethernet card: Connect a USB cord from the USB port on
the modem to an available USB port on the front or back of your
computer. Have the USB Driver disk/CD ready before continuing. You will
be immediately asked to provide USB drivers when you connect the USB
cord to the PC and modem.
Note: USB may not work with Windows 95 or 98. Your computer has neither Ethernet nor USB: You will need to buy and install an Ethernet card for your computer before continuing. Open Internet Explorer (or other browser) If service is ready and devices are connected properly, you should see a “Cable Modem Login” screen. Type your TCC Username (login) and Password. Your password is case-sensitive. If you do not have your password, contact our office and it can be picked up or sent to you. Initial connection requires a computer directly plugged into the modem via Ethernet or USB. Once a wired connection is established, you can log into the router administration console to configure Wireless Access and setup Security.
download Motorola SBG900 Setup Guide here
Motorola SBG900 Setup Guide
Note: USB may not work with Windows 95 or 98. Your computer has neither Ethernet nor USB: You will need to buy and install an Ethernet card for your computer before continuing. Open Internet Explorer (or other browser) If service is ready and devices are connected properly, you should see a “Cable Modem Login” screen. Type your TCC Username (login) and Password. Your password is case-sensitive. If you do not have your password, contact our office and it can be picked up or sent to you. Initial connection requires a computer directly plugged into the modem via Ethernet or USB. Once a wired connection is established, you can log into the router administration console to configure Wireless Access and setup Security.
download Motorola SBG900 Setup Guide here
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.