Thursday, July 5, 2012
Browse »
Home »
Modem
»
Firmware Installation Guide: F1PI241EGau Belkin
Firmware Installation Guide: F1PI241EGau Time required: 10 minutes. The
instructions below outline how to update the firmware on the Belkin
4-port wireless modem/router. By updating the firmware, you will be able
to share your internet connection securely.
IMPORTANT: You must have downloaded the latest Belkin firmware from https://iinet.net.au/products/business/yourhotspot.html to your computer. Getting Started. Connect a Network/Ethernet cable from your computer to LAN 1 on your Wireless Modem. Open your browser and type http://10.1.1.1 into the address bar. Note: If you have changed the LAN address of your modem from its default value, you will need to put in the appropriate address here.
If you find the default doesn’t work but you don’t know what the right value is, check your network settings and try the IP address of your “default gateway”.
download Firmware Installation Guide: F1PI241EGau Belkin here
Firmware Installation Guide: F1PI241EGau Belkin
IMPORTANT: You must have downloaded the latest Belkin firmware from https://iinet.net.au/products/business/yourhotspot.html to your computer. Getting Started. Connect a Network/Ethernet cable from your computer to LAN 1 on your Wireless Modem. Open your browser and type http://10.1.1.1 into the address bar. Note: If you have changed the LAN address of your modem from its default value, you will need to put in the appropriate address here.
If you find the default doesn’t work but you don’t know what the right value is, check your network settings and try the IP address of your “default gateway”.
download Firmware Installation Guide: F1PI241EGau Belkin here
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.