Tuesday, July 3, 2012
98-2008 Audi A4 and S4 2008-0000 concatenate string installation instructions
1. lift the retaining clip from the master cylinder towards the driver of the vehicle. This can be done with the help of a small screwdriver or pick up.
2. pull the clutch line factory to the front of the car to release it from the master cylinder.
3. unscrew the nut of the 9 mm, containing the top line of the factory clutch car body. It is located on the driver's side of the car, the steering rack.
4. release the retaining clip on the factory cylinder, just as you did on the master cylinder in step # 1.
5. remove the clutch line from a vehicle plant. It can be difficult and some people may find it easier to cut the plant to remove it. However, it can be removed in 1 piece, slightly bending the lines where it is connected to the master cylinder and then it can be maneuvered out from under the car.
6. the route line grip through the plant, located in the tray the rain
** Note: If you have the S4 line, make sure that you do not contact the exhaust pipe.
7. install the fitting from the clutch master cylinder line, located at the firewall and secure it to the Terminal.
*** Please note that some models of the A4 and S4 are cylinder, located closer to the brake booster. The new line of clutch can sit against the brake booster. It is perfectly normal and will not affect the product.
Bleeding the clutch system
1. fill the brake fluid reservoir on the top of the brake fluid.
2. Crack open the clutch bleeder valve, using a deep socket 9 mm.
3. wait for about 1-2minutes steady stream of fluid flowing from the bleeder valve.
4. close the bleeder valve.
5. the top of the brake fluid reservoir.
6. the other person pump the clutch pedal inside the car 10-15 times. And then hold the clutch pedal to the floor.
7. Crack open the bleeder, allowing the pressure to be released, and then close the bleeder valve.
8. Repeat steps 5-8, 3-5 times until there is no more air in the system. Make sure that the brake fluid reservoir fluid in it all the time.
Download: http://uspmotorsports.com/downloads/audi%20clutch%20line%20instructions.pdf
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.