Tuesday, July 3, 2012
Revised V8 Vantage key facts
To turn on the V8 engine to cope with the additional power and torque, chain drive, which takes power sprocket timing variable width was increased from 9 plate design 11 plates. (This refers to the number of plates, or links that go across the width of the chain – the higher the number, the greater the chain).Cylinder block
The cylinder block (cylinder diameter) holes, moving from 4.3 V8 89 mm up to 91 mm, which in combination with increased stroke volume engine provides 4.7 liters. Quite simply an extension of the capabilities of each cylinder allows the motor to draw more air, so that more fuel can be burned and more power can be produced.
Immersion cylinder liner
The key change is the inclusion of cases that fall into the cylinder but are not included in the block casting process. The advantage here is that the holes in the cylinder can be manufactured with more precision and holes themselves can be exported to their maximum capacity.
Pistons
As well as increasing the size of the bores from 89 mm to 91 mm for the 4.7 V8, cast Pistons also increase in diameter.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.